{"product_id":"bowers-wilkins-marine-8-2-way-outdoor-speakers-each","title":"Bowers \u0026 Wilkins Marine 8 2-Way Outdoor Speakers (Each)","description":"\u003ch3\u003eBowers \u0026amp; Wilkins Marine 8 Two-Way Marine Speakers\u003c\/h3\u003e \u003cp\u003eBring premium Bowers \u0026amp; Wilkins sound to demanding outdoor and marine environments with the Bowers \u0026amp; Wilkins Marine 8. Designed for boats, yachts, pool areas, patios, and other exposed installations, this high-performance two-way marine speaker combines a large 200mm (8-inch) polypropylene bass\/midrange driver with a 25mm (1-inch) soft-dome tweeter for powerful bass, clear vocals, and detailed high frequencies. An IP66 rating when properly installed helps protect the speaker against water and harsh environmental conditions, while marine-grade stainless-steel hardware and corrosion-resistant construction deliver long-term durability.\u003c\/p\u003e \u003cp\u003eDespite its powerful 8-inch driver, the Marine 8 requires only 93mm (3.7 inches) of mounting depth, making it easier to integrate into space-limited installations. Its wide 36Hz to 26kHz frequency range provides deep, weighty low-frequency performance alongside crisp high-frequency detail, while an 8-ohm nominal impedance and recommended 20W to 80W amplifier power range make it compatible with a variety of high-quality marine and distributed-audio systems. For installations that demand both rugged construction and refined sound, the Marine 8 delivers Bowers \u0026amp; Wilkins audio performance in a purpose-built marine design.\u003c\/p\u003e \u003ch4\u003eSpecifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Two-way marine loudspeaker\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: 2-way system\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWeather Protection\u003c\/strong\u003e: IP66 rated when properly installed\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTweeter\u003c\/strong\u003e: 1 x 25mm (1-inch) soft-dome tweeter\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBass\/Midrange Driver\u003c\/strong\u003e: 1 x 200mm (8-inch) polypropylene cone bass\/midrange driver\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFrequency Range\u003c\/strong\u003e: 36Hz – 26kHz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRecommended Amplifier Power\u003c\/strong\u003e: 20W – 80W\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSensitivity\u003c\/strong\u003e: 90dB (2.83V, 1m) according to the current Bowers \u0026amp; Wilkins product specifications\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNominal Impedance\u003c\/strong\u003e: 8 ohms\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOuter Diameter\u003c\/strong\u003e: 292mm (11.5 inches)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCut-Out Diameter\u003c\/strong\u003e: 249mm (9.8 inches) according to the current Bowers \u0026amp; Wilkins product page\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMounting Depth\u003c\/strong\u003e: 93mm (3.7 inches) behind the mounting surface\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eProtrusion\u003c\/strong\u003e: 8mm (0.3 inches)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 1.7kg (3.8 lb) per speaker\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eGrille Material\u003c\/strong\u003e: Marine-grade stainless steel\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eScrew Material\u003c\/strong\u003e: Marine-grade stainless steel\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDriver Chassis\u003c\/strong\u003e: Non-corroding rigid polymer\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eTweeter Protection\u003c\/strong\u003e: Rear-supported tweeter dome designed to resist permanent deformation when exposed to hosing\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePre-Mount Kit\u003c\/strong\u003e: C8 \/ PMK C8\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCompatible Back Box\u003c\/strong\u003e: 6C; Bowers \u0026amp; Wilkins specifies that this back box is not suitable for marine applications\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Note\u003c\/strong\u003e: A downloadable Bowers \u0026amp; Wilkins information sheet lists 88dB sensitivity and a 253mm (10-inch) cut-out diameter, while the current product page lists 90dB and 249mm (9.8 inches); verify the latest installation template or quick-start guide before making the mounting cut-out.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eWhat It's Great At\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMarine and Outdoor Installations\u003c\/strong\u003e: IP66-rated construction makes the Marine 8 well suited to boats, yachts, pool areas, covered outdoor entertainment spaces, and other demanding installations when properly installed.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePowerful Full-Range Sound\u003c\/strong\u003e: The large 8-inch polypropylene bass\/midrange driver delivers substantial low-frequency weight while the 1-inch soft-dome tweeter adds clear, detailed high frequencies.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShallow Installation Spaces\u003c\/strong\u003e: A mounting depth of only 93mm (3.7 inches) helps accommodate locations where space behind the mounting surface is limited.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistance\u003c\/strong\u003e: Marine-grade stainless-steel components and a non-corroding rigid polymer driver chassis are engineered for challenging marine conditions.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePremium Distributed Audio\u003c\/strong\u003e: An 8-ohm nominal impedance and recommended 20W to 80W amplifier range make the Marine 8 suitable for professionally designed marine and outdoor audio systems.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean, Integrated Appearance\u003c\/strong\u003e: Flush-mount installation and black or white finish options allow the speakers to blend neatly into a wide range of boat and architectural surfaces.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eFAQ Section\u003c\/h4\u003e \u003cp\u003e\u003cstrong\u003eQ: Is the Bowers \u0026amp; Wilkins Marine 8 waterproof?\u003c\/strong\u003e\u003cbr\u003eA: The Marine 8 carries an IP66 rating when properly installed, providing strong protection against water jets, spray, and demanding outdoor or marine conditions. Correct installation is essential for achieving the specified protection level.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What size woofer does the Marine 8 use?\u003c\/strong\u003e\u003cbr\u003eA: It uses a 200mm (8-inch) polypropylene cone bass\/midrange driver paired with a 25mm (1-inch) soft-dome tweeter.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How much amplifier power is recommended?\u003c\/strong\u003e\u003cbr\u003eA: Bowers \u0026amp; Wilkins recommends an amplifier delivering between 20 and 80 watts for the Marine 8.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How much mounting depth does the Marine 8 require?\u003c\/strong\u003e\u003cbr\u003eA: The speaker requires approximately 93mm (3.7 inches) of depth behind the mounting surface, making it relatively shallow for an 8-inch marine speaker.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What is the frequency range of the Marine 8?\u003c\/strong\u003e\u003cbr\u003eA: The Marine 8 is specified for a frequency range of 36Hz to 26kHz, allowing it to reproduce deep bass along with detailed high frequencies.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Is the Marine 8 designed to resist corrosion?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The grille and screws use marine-grade stainless steel, while the driver chassis is manufactured from a non-corroding rigid polymer to help withstand demanding marine environments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can the Bowers \u0026amp; Wilkins 6C back box be used on a boat?\u003c\/strong\u003e\u003cbr\u003eA: The Marine 8 is compatible with the 6C back box, but Bowers \u0026amp; Wilkins specifically states that the 6C back box is not suitable for marine applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What cut-out size should I use when installing the Marine 8?\u003c\/strong\u003e\u003cbr\u003eA: The current Bowers \u0026amp; Wilkins product page specifies a 249mm (9.8-inch) cut-out. A downloadable technical sheet lists 253mm (10 inches), so installers should confirm the latest supplied template or installation guide before cutting the mounting surface.\u003c\/p\u003e","brand":"Bowers \u0026 Wilkins","offers":[{"title":"Default Title","offer_id":62871793827999,"sku":"B\u0026W-MARINE8-WHI","price":700.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/listenup.com\/products\/bowers-wilkins-marine-8-2-way-outdoor-speakers-each","provider":"ListenUp","version":"1.0","type":"link"}