{"product_id":"kanto-pmx700-full-motion-tv-mount-pro-series","title":"Kanto PMX700 Full Motion TV Mount - Pro Series","description":"\u003ch3\u003eKanto PMX700 Full Motion TV Mount – Pro Series\u003c\/h3\u003e \u003cp\u003eThe Kanto PMX700 Full Motion TV Mount – Pro Series is built for large-screen flexibility, strength, and clean installation. Designed for most 50-inch to 100-inch flat-panel TVs, this articulating TV wall mount supports up to 150 lb and fits VESA patterns from 200x100 to 700x500. Its dual articulating arms extend up to 31.3 inches from the wall, retract to a low-profile 2.6 inches, and provide smooth tilt, swivel, horizontal offset, and leveling adjustments for an optimized viewing angle in living rooms, media rooms, conference spaces, and custom installations. With solid steel construction, integrated cable management, aluminum wall plate covers, included installation hardware, cULus certification, and a 10-year warranty, the PMX700 is a premium full-motion wall mount made for secure, polished big-screen setups.\u003c\/p\u003e \u003ch4\u003eWhat It's Good At:\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSupporting large 50-inch to 100-inch TVs up to 150 lb with a solid steel frame.\u003c\/li\u003e \u003cli\u003eExtending up to 31.3 inches to reach around fireplaces, recessed areas, or deep viewing positions.\u003c\/li\u003e \u003cli\u003eCreating flexible viewing angles with +12°\/-3° tilt and up to 180° swivel depending on TV size.\u003c\/li\u003e \u003cli\u003eCentering the TV even when wall studs are not perfectly positioned, thanks to 22 inches of total horizontal offset.\u003c\/li\u003e \u003cli\u003eKeeping installations clean with integrated cable management and aluminum covers that conceal lag bolts.\u003c\/li\u003e \u003cli\u003eSimplifying setup with a paper wall template, installation manual, and hardware for wood stud or concrete installation.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eKanto PMX700 Full Motion TV Mount – Pro Series Full Specifications:\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eModel: PMX700\u003c\/li\u003e \u003cli\u003eProduct Type: Full Motion TV Mount\u003c\/li\u003e \u003cli\u003eSeries: Pro Series\u003c\/li\u003e \u003cli\u003eMount Style: Full-motion dual-stud articulating wall mount\u003c\/li\u003e \u003cli\u003eCompatible TV Sizes: 50\" to 100\"\u003c\/li\u003e \u003cli\u003eCompatible TV Size Range: 106 cm to 254 cm\u003c\/li\u003e \u003cli\u003eMaximum Weight Capacity: 150 lb\u003c\/li\u003e \u003cli\u003eMaximum Weight Capacity: 68 kg\u003c\/li\u003e \u003cli\u003eVESA Compatibility: 200x100 to 700x500\u003c\/li\u003e \u003cli\u003eHorizontal VESA Range: 200 mm to 700 mm\u003c\/li\u003e \u003cli\u003eVertical VESA Range: 100 mm to 500 mm\u003c\/li\u003e \u003cli\u003eExtension Range: 2.6\" to 31.3\"\u003c\/li\u003e \u003cli\u003eExtension Range: 6.6 cm to 79.5 cm\u003c\/li\u003e \u003cli\u003eLow-Profile Depth: 2.6\" from wall when fully retracted\u003c\/li\u003e \u003cli\u003eMaximum Extension: 31.3\" from wall\u003c\/li\u003e \u003cli\u003eTilt Range: +12° to -3°\u003c\/li\u003e \u003cli\u003eTotal Tilt Range: 15°\u003c\/li\u003e \u003cli\u003eSwivel Range: Up to 180° at full extension with a 50\" TV\u003c\/li\u003e \u003cli\u003eSwivel Direction: Up to 90° left or right depending on screen size\u003c\/li\u003e \u003cli\u003eHorizontal Offset: +\/- 11\"\u003c\/li\u003e \u003cli\u003eTotal Horizontal Offset: 22\"\u003c\/li\u003e \u003cli\u003eHorizontal Offset: +\/- 27.9 cm\u003c\/li\u003e \u003cli\u003eAdjustable Horizontal Leveling: Yes\u003c\/li\u003e \u003cli\u003eCable Management: Integrated cable management with cable raceways\/clips\u003c\/li\u003e \u003cli\u003eArm Design: Dual articulating arms \/ wishbone-style arms\u003c\/li\u003e \u003cli\u003eWall Plate Width: 32.4\"\u003c\/li\u003e \u003cli\u003eWall Plate Width: 82.3 cm\u003c\/li\u003e \u003cli\u003eStud Compatibility: Dual-stud installation with up to 24\" stud spacing\u003c\/li\u003e \u003cli\u003eStandard Stud Spacing Support: 16\" and up to 24\"\u003c\/li\u003e \u003cli\u003eConstruction: Solid steel\u003c\/li\u003e \u003cli\u003eFinish: Durable powder-coated finish\u003c\/li\u003e \u003cli\u003eCovers: Aluminum wall plate covers to hide lag bolts\u003c\/li\u003e \u003cli\u003eCertification: cULus Certified\u003c\/li\u003e \u003cli\u003eWarranty: 10 years\u003c\/li\u003e \u003cli\u003eProduct Weight: 44.5 lb\u003c\/li\u003e \u003cli\u003eProduct Weight: 20.2 kg\u003c\/li\u003e \u003cli\u003eShipping Box Weight: 56 lb\u003c\/li\u003e \u003cli\u003eShipping Box Weight: 25.4 kg\u003c\/li\u003e \u003cli\u003eShipping Box Dimensions: 40\" x 20.9\" x 4.8\"\u003c\/li\u003e \u003cli\u003eShipping Box Dimensions: 101.5 x 53.2 x 12.3 cm\u003c\/li\u003e \u003cli\u003eUPC: 800152716640\u003c\/li\u003e \u003cli\u003eIncluded: Paper wall template for marking pilot holes\u003c\/li\u003e \u003cli\u003eIncluded: Installation manual\u003c\/li\u003e \u003cli\u003eIncluded: Mounting hardware for wood stud and concrete installation\u003c\/li\u003e \u003cli\u003eIncluded: TV mounting screws, washers, spacers, lag bolts, and concrete anchors\u003c\/li\u003e \u003cli\u003eRequired Tools: Socket set, Phillips screwdriver, pencil, level, measuring tape, drill\u003c\/li\u003e \u003cli\u003eRequired Wood Stud Tools: Stud finder and 1\/4\" wood bit\u003c\/li\u003e \u003cli\u003eRequired Concrete Tools: Hammer and 5\/8\" masonry bit\u003c\/li\u003e \u003cli\u003eInstallation Surface: Vertical surface only\u003c\/li\u003e \u003cli\u003eSupported Wall Types: Wood stud wall and concrete wall\u003c\/li\u003e \u003cli\u003eNot Recommended For: Steel stud walls or cinder block walls\u003c\/li\u003e \u003cli\u003eWall Strength Requirement: Wall must support more than 5 times the combined weight of the TV and mount\u003c\/li\u003e \u003cli\u003eConcrete\/Brick Requirement: Concrete or brick wall must be at least 4\" thick\u003c\/li\u003e \u003cli\u003eConcrete Density Requirement: Concrete must be at least 2000 psi\u003c\/li\u003e \u003cli\u003eConcrete Installation Note: Concrete anchors must not be used in drywall or wood stud walls\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eKanto PMX700 Full Motion TV Mount – Pro Series Q\u0026amp;A:\u003c\/h4\u003e \u003cdl\u003e \u003cdt\u003e\u003cstrong\u003eWhat size TVs does the Kanto PMX700 support?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eThe PMX700 is designed for most flat-panel TVs from 50 inches to 100 inches and supports up to 150 lb.\u003c\/dd\u003e \u003cdt\u003e\u003cstrong\u003eWhat VESA patterns are compatible with the PMX700?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eThis mount supports VESA patterns from 200x100 to 700x500, making it compatible with a wide range of large TVs.\u003c\/dd\u003e \u003cdt\u003e\u003cstrong\u003eHow far does the PMX700 extend from the wall?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eThe mount extends up to 31.3 inches from the wall and retracts to a low-profile 2.6 inches when pushed back.\u003c\/dd\u003e \u003cdt\u003e\u003cstrong\u003eCan this mount swivel and tilt?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eYes. The PMX700 offers +12° to -3° tilt and up to 180° of swivel at full extension with a 50-inch TV, depending on screen size.\u003c\/dd\u003e \u003cdt\u003e\u003cstrong\u003eCan the TV be centered if the studs are not perfectly positioned?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eYes. The arm assembly can be shifted 11 inches left or right for 22 inches of total horizontal offset, helping center the TV on the wall.\u003c\/dd\u003e \u003cdt\u003e\u003cstrong\u003eDoes the PMX700 include cable management?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eYes. Integrated cable management raceways and clips help keep wires organized and hidden for a cleaner installation.\u003c\/dd\u003e \u003cdt\u003e\u003cstrong\u003eWhat wall types can the PMX700 be installed on?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eThe mount includes hardware for wood stud and concrete installation. It should not be installed on steel stud walls or cinder block walls.\u003c\/dd\u003e \u003cdt\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003c\/dt\u003e \u003cdd\u003eThe PMX700 includes the mount, paper wall template, installation manual, TV screws, spacers, washers, lag bolts, concrete anchors, and installation hardware for supported wall types.\u003c\/dd\u003e \u003c\/dl\u003e","brand":"Kanto","offers":[{"title":"Default Title","offer_id":62839494115487,"sku":"KAN-PMX700-BLK","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/6910\/4031\/files\/4baa0474-0b5e-4996-8b39-a3ca489c0a9e.jpg?v=1785268239","url":"https:\/\/listenup.com\/products\/kanto-pmx700-full-motion-tv-mount-pro-series","provider":"ListenUp","version":"1.0","type":"link"}