Similar Products
View More
We’ll be happy to e-mail you when this item is available. Just fill in your name and e-mail address
We’ll be happy to e-mail you when this item is available. Just fill in your name and e-mail address
The M&K Sound In-Wall Subwoofer
More than four decades of experience and insight have been applied to the design of this truly invisible subwoofer, based on high-performance 8" woofers specially developed for the M&K Sound V Series subwoofers and ingeniously adapted to meet the extreme demands of shallow, flush-mount installation while delivering the quantity and quality of deep bass that consumers and professionals expect from M&K Sound.
The specially tuned, ultra-fast, mass-loaded dual drivers employ aluminum shorting rings for minimal voice coil distortion at long excursion. Highly rigid paper pulp cones with high inner damping ensure stability at extreme levels and low resonance.
The ultra-linear solid ferrite magnet system provides effective dissipation of heat from the voice coil to prevent power compression from limiting the acoustic output of the system.
The drivers are installed in full contact with the front baffle and the rear of the box for ideal mechanical stability to minimize driver resonances that can occur due to the limited volume of an In-Wall enclosure.
M&K IW28S Bass Driver
M&K Sound proudly works to a higher, stricter standard and the specifications for their exclusive, custom designed drivers down to the last detail, they deliver the precision and effortless, natural sound reproduction that continue to make M&K Sound the first choice of professionals and enthusiasts.
| Impedance | 4 ohm |
| Bass Drivers: | 2 x 8” paper pulp |
| Frequency Response: | 28 Hz – 200 Hz, ± 3dB |
| Sensitivity (drive signal 100mVolt VA500 amp) | 88 dB/1m |
| Grille Dimensions (HxW): | 24.48 x 12.44”, 622 x 312 mm |
| Baffle Dimensions (HxW): | 24.25 x 12.04”, 616 x 306 mm |
| Wall Cutout (HxW): | 22.84 x10.62”, 580 x 270 mm |
| Mounting Depth: | 3.74”, 95 mm |
| Weight: | 24.2 lbs / 11 kg |
For a discrete install, the IW28s subs are fantastic.
The M&K Sound In-Wall Subwoofer
More than four decades of experience and insight have been applied to the design of this truly invisible subwoofer, based on high-performance 8" woofers specially developed for the M&K Sound V Series subwoofers and ingeniously adapted to meet the extreme demands of shallow, flush-mount installation while delivering the quantity and quality of deep bass that consumers and professionals expect from M&K Sound.
The specially tuned, ultra-fast, mass-loaded dual drivers employ aluminum shorting rings for minimal voice coil distortion at long excursion. Highly rigid paper pulp cones with high inner damping ensure stability at extreme levels and low resonance.
The ultra-linear solid ferrite magnet system provides effective dissipation of heat from the voice coil to prevent power compression from limiting the acoustic output of the system.
The drivers are installed in full contact with the front baffle and the rear of the box for ideal mechanical stability to minimize driver resonances that can occur due to the limited volume of an In-Wall enclosure.
M&K IW28S Bass Driver
M&K Sound proudly works to a higher, stricter standard and the specifications for their exclusive, custom designed drivers down to the last detail, they deliver the precision and effortless, natural sound reproduction that continue to make M&K Sound the first choice of professionals and enthusiasts.
| Impedance | 4 ohm |
| Bass Drivers: | 2 x 8” paper pulp |
| Frequency Response: | 28 Hz – 200 Hz, ± 3dB |
| Sensitivity (drive signal 100mVolt VA500 amp) | 88 dB/1m |
| Grille Dimensions (HxW): | 24.48 x 12.44”, 622 x 312 mm |
| Baffle Dimensions (HxW): | 24.25 x 12.04”, 616 x 306 mm |
| Wall Cutout (HxW): | 22.84 x10.62”, 580 x 270 mm |
| Mounting Depth: | 3.74”, 95 mm |
| Weight: | 24.2 lbs / 11 kg |
For a discrete install, the IW28s subs are fantastic.
