SVS SoundPath Wireless Audio Adapter
The SVS SoundPath Wireless Audio Adapter makes it easy to add wireless audio to subwoofers, powered speakers, and amplifiers—so you can place gear where it sounds best, not where a cable allows. Designed to eliminate long RCA runs and reduce clutter, it delivers a clean, full-range signal at CD-quality with ultra-low latency for seamless home theater and 2-channel setups. Setup is simple: connect the transmitter to your AV receiver, TV, surround processor, or preamp output, connect the receiver to your subwoofer or powered speakers, power both units, and enjoy reliable wireless performance. It also supports system expansion, allowing a single transmitter to send audio to up to three receivers, making it a flexible solution for multi-sub or multi-zone needs. The SVS SoundPath Wireless Audio Adapter is part of ListenUp's SVS Wireless Adapters Collection.
What It's Good At:
- Clean wireless subwoofer placement without running long RCA/LFE cables across the room
- Full-range wireless audio suitable for subwoofers, powered speakers, and amplifiers
- Low-latency performance that stays tight and in-sync for movies, gaming, and music
- Easy, fast installation with included cables and power supplies—no special hardware required
- Expandable setups with support for pairing one transmitter to up to three receivers
- Clutter reduction and cleaner installs for living rooms, media rooms, and dedicated theaters
SVS SoundPath Wireless Audio Adapter Full Specifications:
-
Product Type: Wireless audio adapter kit (transmitter + receiver)
-
Wireless Band: 2.4 GHz
-
RF Frequency Band: 2.404 – 2.476 GHz (transmitter & receiver)
-
Modulation: GFSK (transmitter & receiver)
-
Working/Transmission Distance: Up to 65 feet (line of sight)
-
Latency / Delay Time: 14 milliseconds (typical); < 14 milliseconds (spec)
-
Audio Transmission Format (as described): 16-bit / 48 kHz signal
-
Frequency Response (Transmission rating shown on product page): 6 Hz to 22,000 Hz ±1 dB
-
Frequency Response (Owner’s manual spec): 5 Hz – 24 kHz ±1.5 dB (transmitter & receiver)
-
THD+N: -70 dB @ 1 kHz (transmitter & receiver)
-
SNR: +85 dB @ 1 kHz (transmitter & receiver)
-
Transmitter Power: ≤ 10 dBm
-
Receiver Sensitivity: -85 dBm
-
Operating Voltage: 5 VDC, 1A (transmitter & receiver)
-
Pairing / Sync: Synced at manufacture and pairs automatically when powered on (re-pairing supported)
-
Multi-Receiver Support: One transmitter can transmit to up to three (3) receivers
-
System Compatibility (What you will need): Subwoofer/powered speakers/amplifier + AV receiver/surround processor/2-channel preamp with subwoofer pre-out (LFE) or L/R line level pre-out
-
In the Box: 1× Transmitter, 1× Receiver, 2× 3.5 mm to single RCA interconnect cables (22”), 2× 3.5 mm to dual RCA interconnect cables (22”), 2× USB-A to Micro-B power cables (32”), 2× 5 VDC power supplies with USB-A connectors
SVS SoundPath Wireless Audio Adapter Q&A:
- What does the SoundPath Wireless Audio Adapter do?
- It wirelessly sends an audio signal from your receiver, processor, TV, or preamp output to a subwoofer, powered speaker, or amplifier—helping eliminate long cables and expand placement options.
- Is it only for subwoofers, or can it be used for speakers and amps too?
- It can be used for subwoofers and also for powered speakers and amplifiers, making it useful for home theater and 2-channel audio systems.
- What’s the wireless range?
- The rated working distance is up to 65 feet line of sight. Best results come from keeping the transmitter and receiver unobstructed when possible.
- Will there be lip-sync or timing issues?
- The adapter is designed for low latency (~14 ms). Many systems can compensate, and a small delay is normal for wireless audio devices.
- Can one transmitter connect to more than one receiver?
- Yes. A single transmitter can transmit to up to three (3) receivers, which is ideal for multi-subwoofer or multi-zone applications.
- What connections does it use?
- The kit uses included 3.5 mm to RCA interconnect cables (single RCA for LFE/mono and dual RCA for stereo L/R), making it easy to interface with common audio outputs/inputs.
- What power does it require?
- Both units run on 5 VDC, 1A power and include power supplies plus USB-A to Micro-B power cables.
- How can interference or dropouts be minimized?
- Keep the units within range and as close to line-of-sight as possible, and avoid placing them next to common 2.4 GHz sources such as Wi-Fi routers, baby monitors, or wireless phones.
SVS SoundPath Wireless Audio Adapter Downloads:
SVS SoundPath Wireless Audio Adapter Manual
