McIntosh MT10 Precision Turntable

• Belt drive
• Moving Coil cartridge
• Illuminated speed meter

With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable.

McIntosh MT10 Turntable Specifications

CARTRIDGE SPECIFICATIONS

• Cartridge Type: Moving Coil, Low Output
• Output Level: 0.5 mV at 5 cm/s
• Load Impedance: 400 to 500 Ohms recommended
• Frequency Response: 20Hz to 50kHz
• Channel Separation: Greater than 30dB at 1Khz
• Compliance: 6 x 10-6 cm/dyne
• Recommended Tracking Force: 2.4 g
• Channel Difference: Less than 0.3dB at 1kHz
• Total Mass: 11 g
• Stylus: Elliptical Diamond
• Cantilever Material: Aluminum

TONEARM SPECIFICATIONS

• Bearing: Sapphire and Ceramic
• Arm Tube: Dural-Aluminum
• Counterweight: Eccentric
• Adjustments: Vertical Tracking Angle, Antiskate, Azimuth

TURNTABLE SPECIFICATIONS

• Playback Speeds: 33-1/3, 45 and 78 rpm
• Motor Type: DC Brushless
• Speed Control: Electronic w/ braking feature
• Platter: Silicon Acrylic
• Platter Bearing: Magnetic Suspended Ceramic
• Signal To Noise Ratio: 41dB - 44dB
• Wow & Flutter: 0.10% - 0.15%

CONNECTIVITY

• Stereo Outputs Unbalanced: 1

CONTROL

• Power Control Input: 1
• Power Control Output: 1
• Platter Light: Yes
• Speed Control Fine Adjustment: Yes

GENERAL SPECIFICATIONS

• Dust Cover Included: No

WEIGHTS & DIMENSIONS

• Unit Dimensions (W x H x D): 17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm) Note: Tone Arm Height will vary depending on the type of Cartridge installed.
• Unit Weight: 42 lbs (19 kg)
• Shipping Weight: 63 lbs (28.6 kg)